www.flickr.com
|
Considering the Rolls is still made I don't think that's an equal trade. How about a Rolls with attached CF Anchor.
white folks:stumptown:Oh boy, good old standover height... I love how many people are still relying on bike size fitting methods from the 70's...
hey we dont make the rules. we just bend them. your 53cm anchor coulda been a "56" so to speak...
Anchor was a 55cm square bike c-c. So 56 or 57 c-t for the ST. Man I feel like I'm talking foreign languages with all these abbreviations lol.
Jack:used windsor the hour frameset in white. 49cm.
Frame fork and headset.
$500
how bout $100 straight up cash.
I will include the center to top measurements, as well as the stand over height. Thanks for the suggestion doug.
I got a chrome metropolis bag I'm trying to sell or trade for a smaller size. red w/ black strap, right shoulder
haha, 500 dollars. this isnt lafixed idiot
jerome is fuckin ornery lately
pooberty.
anita:I got a chrome metropolis bag I'm trying to sell or trade for a smaller size. red w/ black strap, right shoulder
i got a small (maybe its a medium) timbuk2. no shoulder pad or cross-strap, but im not really using it for anything. two bucks if you want it? i used it once to ride from sellwood to gateway and my entire left arm fell asleep. so i'm sticking to backpacks when i don't need the 25 acres of storage that my kremlin gives.
(i guess that doesn't help you get any $ from your chrome, but... i dunno)
and doug i want those two yellow tires, haha, oregon duck kilo is go go go go go go
young jeezy is a fag.
lafixed is gay as fuck.
Jack:young jeezy is a fag.
lafixed is gay as fuck.
i think you just proved everyone's point. ftl?
Jack:young jeezy is a fag.
lafixed is gay as fuck.
homo pending
but for reals:
$500 for a wnidsor frameset? did you mean $50 (fifty) and had a typo? otherwise , ban this noob.
Maybe he means one of the older, lugged windsor frames?
They were not bad, the new mass-produced ones are another story.
Ok, here is my little track bike:
http://portland.en.craigslist.org/mlt/bik/781960992.html
Should be an interesting next few days. Or just totally boring.
i wish i could afford it.
Well, it didn't take long for a "public service announcement":
http://portland.craigslist.org/mlt/bik/781978621.html
I changed the ad to respond to his "wisdom".
I seem to recall a crashed anchor that went for a significant amount on ebay, yet I am getting called out for a inconsequential mark on my seat stay.
sigh.
Big drama! Yo keep your mouth shut about the Anchor haha!! Just kidding dude. But yeah, your seatstay mark looks like a fucking paint scratch at best...
PS damn, I never realized just how top dollar you did that bike. Those tubulars are real nice, if you were selling just the wheels I'd save up and buy them from you.
"ass-kicking $0"
man, are you really giving that away for free?!
what a steal!
Scott maybe you should then put it up on Ebay so you don't have to deal with the trolls on Craigslist. I sold that Anchor as a good deed for Machew because he was having a hard time selling it. Just a thought.
Probably get $1,800 no problem on eBay, maybe 2G's.
sharky:Scott maybe you should then put it up on Ebay so you don't have to deal with the trolls on Craigslist. I sold that Anchor as a good deed for Machew because he was having a hard time selling it. Just a thought.
Thanks sharky.
I appreciate the advice. I agree ebay opens up possibilities.
Should I go the .99cent start with a reserve or start with a high bid, and a buy it now option?
I am not familiar with how ebay takes money depending on how it gets set up.
basically they take a lot of money from you
yung jeezy pdx:basically they take a lot of money from you
Oh I know, its not like 5 years ago.
I think there are cheaper ways. The "buy it now" feature is pricey. Not sure about setting up reserves.
I think you could easily get back what you have into the frame and fork, and re-invest in a F&F thats more your size. I really liked the novelty of knowing someone who rode their all NJS joint.
I may go that route. Keep the cranks & chainring, etc and sell the frame/fork.
So far interest in the frame is zero.
*snobbery mode*
yo doug, them there rims and tires ain't no NJS rigs! but they're SICK and TRACK (read: totally tarck)!!!&
aight i'm done bein a dick!!
scotty, eBay that frame fo sho. what do you ride anyway, a 55? i thought we were about the same height and we both had the same KHS track frames in 53...
stumptown:*snobbery mode*
yo doug, them there rims and tires ain't no NJS rigs! but they're SICK and TRACK (read: totally tarck)!!!&
aight i'm done bein a dick!!
HAHA!
Thats real tarck- riding tubulars on the streets, carrying pre-stretched tires and glue.
Yeah, more along the lines of 54cm track geometry.
I will give it a few more days, then off to the bay.
Well there is a big difference between just people in Portland looking at what you have to sell, or every one else on the planet that has a computer looking at what you have to sell.Ebay takes 3.5% for items up to $1,000, about 1% for every thing after. A couple dollars to list the item. Paypal however takes 5% for there service, but the convenience is worth it sometimes.
For Sale
I'm looking to sell my frame and wheelset.
Uno Pista njs frame/fork. Built by Fujishiro for S. Hayakawa in 1996.
50cm seat tube ctc. 52cm top tube ctc. 120mm rear spaced. It comes with a Hatta Swan headset and R9400 bottom bracket. There is a small dent in the tt, It is minor, much less pronounced than other dents I have seen on njs frames. Chromed underneath paint throughout.
The wheelset is Suzue Pro Max SB 120/100 laced to Mavic Open Pro rims with DT competition double butted spokes.

I'm not sure what price to list these at so I'm just going to take offers. Whisper me if you have any questions or what more pics.

its a beaut
awe man i love that bike. super classy.
i guess now i could edit my post but i think a repost of that pic is necessary
Update/Bump. $500 takes the frame. $275 for the wheels. I'll be back in Portland in 10 days.
crossett how tall are you? I mean I understand the sizing on a 50cm but just curious none the less.
FS: New Nitto CrMo B123 38cm $40
jonb:crossett how tall are you? I mean I understand the sizing on a 50cm but just curious none the less.
I'm 5'7", but I have short legs and a long torso. I'm looking at getting a frame with a 54cm tt and a 51cm seat tube. This bike has almost exactly the same geometry as my friend's Bridgestone. She is more like 5'4" and it fits her well with a shorter stem (80mm?)
potentially a rear bolt on track aerospoke, stock color. im thinking about it.
UH OH
out of all the people with aero wheels, sounds like you got over yours the fastest.
yep. after last night, i think im done
yung jeezy pdx:yep. after last night, i think im done
What happened last night?
i rode it.
Ha! ^^^
Let's trade for bike parts.
for your spinergys
They tubies...
with cross tires glued on, i know. too bad its SOLD!
Specialized Stumpjumper Pro rigid mtb frame. 18in (med). Probably 8/9 years old. Some scrapes, great shape. Really light. $75

FSA K-wing carbon handlebars. Used last year for a bit. Good shape and really comfortable/light/stiff/cool looking. I'm going to a compact bar for 'cross this season, so I have to sell these. $100

Cinelli old-logo track bars and stem. Typical scratches, but straight and true. I don't want to sell these.
Bars are 39 cm, stem is 130mm. $125


3T Pista bars. 42cm. Heat treated alloy. Similar bend to the Cinellis, but a little wider. $35


Deda Velocita bars/Newton Pista stem. The stiff shit for you crushers. I think the bars are 44cm, stem is 120mm.
$125


Dura-ace track pedals. Used but in good condition and spin great. Cleats included (these are $50 alone).
$150


Reasonable offers/trades considered. Please whisper for more info.
Anyone interested in a Turbo saddle I have two and can't use them both at the same time. The one I'd like to sell is black and most of the branding is in good shape for its vintage. I'd like $50 OBO